Loading... Please wait...

STL Download - ZMR250 Uni Mount (All Versions)

Hover over image to zoom

  • Image 1
Plastic Spider Designs
$1.50

 Product Description

Includes STL Files of the following versions of the Uni Mount for the ZMR 250 Frame.

  • Uni Mount for Vtx & Rx (Short Version) - This works with the D4R-II Radio Rx and one of the following 3 Video Tx's (TS5823 200mw Video Tx, TS5828 600mw Video Tx and Eagle FPV200 200mw Video Tx).  May work with other Rx and Vtx's but not confirmed.
  • Uni Mount for Vtx & Rx (Long Version) - This works with the D4R-II Radio Rx and one of the following 3 Video Tx's (TS5823 200mw Video Tx, TS5828 600mw Video Tx and Eagle FPV200 200mw Video Tx).  May work with other Rx and Vtx's but not confirmed.
  • Uni Mount for Vtx (Short Version) - This works with the following 3 Video Tx's (TS5823 200mw Video Tx, TS5828 600mw Video Tx and Eagle FPV200 200mw Video Tx).  May work with other Rx and Vtx's but not confirmed.
  • Uni Mount for Vtx (Long Version) - This works with the following 3 Video Tx's (TS5823 200mw Video Tx, TS5828 600mw Video Tx and Eagle FPV200 200mw Video Tx).  May work with other Rx and Vtx's but not confirmed.
  • Uni Mount for Rx - This works with the D4R-II Radio Rx.

Simple Usage License for Uni-Mount STL Files:

Please read this license entirely before purchasing this digital download (STL files) from Plastic-Spider LLC / Great 3D.  Note that this is NOT a Creative Commons License.

By purchasing and downloading this digital download (STL files) associated with the Uni-Mount by Plastic Spider Designs you are granted the following permissions under this License:

  1. 1.     Permission is granted to make 3D Printed copies of the STL files for your own personal use
  2. 2.     Permission is granted to make 3D Printed copies of the STL file for friends provided you do not charge any money for postage, material, printing service or the 3D Printed part.  In other words, the receiving party should be a friend and not pay anything for the part.
  3. 3.     Permission is granted to edit the STL file for your own personal use.

Things you cannot do

  1. 1.     You may not distribute the STL files in any form or under any circumstances.  This includes sending the file to friends, uploading to websites such as Thingiverse or Shapeways.  If someone you know would like a copy of the files please direct them to our website.
  2. 2.     You may not sell the 3D printed parts produced from the STL files or their edited versions.
  3. 3.     You may not share edited versions of the STL files.

Warranty and support

  1. 1.     No warranty or support is provided with this digital download or the 3D printed items produced from this digital download other than the recommendations below.

Recommendations for printing

  1. 1.     This part should be printed with ABS or TPU.  We do not recommend PLA be used.
  2. 2.     Support is required for areas that do not sit flat on the print bed.
  3. 3.     Layer height of .2mm
  4. 4.     Infill of 100%
  5. 5.     Extrusion width should allow for infill to ensure a strong part.

 Notes on different versions.

This works with the D4R-II Radio Rx and one of the following 3 Video Tx's (TS5823 200mw Video Tx, TS5828 600mw Video Tx and Eagle FPV200 200mw Video Tx). This may accept other Video Tx's since there seem to be quite a few models using the same circuit board but no other models have yet been confirmed. These are not compatible with the Version 2 frame sold from MRM.

ZMR 250
Uni-Mount Rx/Tx Long (This extends the SMA connector on the Video Tx past the rear edge of the top plate)

Uni-Mount Rx/Tx Short (This aligns the SMA connector with the small hole at the back of the top plate. Note that the hold must be widened for the SMA connector to fit)
 
Also the following improvements have been made to the ZMR 250 Uni-Mounts over the previous version.
1. Thicker Antenna Tube Holders for better strength.
2. Additional support added to the Uni-Mount frame at the rear for better support of the battery strap.
3. Knock-outs for the wiring on the 4 Video Tx's (TS5823, TS5828, Eagle FPV200 and FX718-6 600mw)
4. Rear Standoff Spacers included for all Video Tx versions to help prevent the Uni-Mount frame from cracking in a hard upside down crash.
Great 3d is now carrying these.
5. F/S button on D4R-II aligns with slot in ZMR250 Top Plate.

6. Switches for Channel Selection on the TS5823 and TS5828 align with the cutout in the ZMR250 Top Plate. Circular Cutout on the left side allows access to the button to change channels on the Eagle FPV200. You can change channels on all of these Video Tx's without removing the top plate. The item was designed by pLaStIc sPiDeR and a portion of this sale goes directly to him!

 
Uni-Mount Tx Long (Just Video Tx - This extends the SMA connector on the Video Tx past the rear edge of the top plate)

Uni-Mount TX Short (Just Video Tx - This aligns the SMA connector with the small hole at the back of the top plate. Note that the hold must be widened for the SMA connector to fit)

Uni-Mount Rx (Just for D4R-II Radio Tx)
 
 
Also the following improvements have been made to the Uni-Mounts over the previous version.
1. Thicker Antenna Tube Holders for better strength.
2. Additional support added to the Uni-Mount frame at the rear for better support of the battery strap.
3. Knock-outs for the wiring on the 4 Video Tx's (TS5823, TS5828, Eagle FPV200 and FX718-6 600mw)
4. Rear Standoff Spacers included for all Video Tx versions to help prevent the Uni-Mount frame from cracking in a hard upside down crash.
Great 3d is now carrying these.
5. F/S button on D4R-II aligns with slot in ZMR250 Top Plate.

6. Switches for Channel Selection on the TS5823 and TS5828 align with the cutout in the ZMR250 Top Plate. Circular Cutout on the left side allows access to the button to change channels on the Eagle FPV200. You can change channels on all of these Video Tx's without removing the top plate. The item was designed by pLaStIc sPiDeR and a portion of this sale goes directly to him!

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

newsletter

Follow us on

Copyright 2018 Plastic-Spider. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the STL Download - ZMR250 Uni Mount (All Versions) to your wish list.