Loading... Please wait...

HS1177 Universal Adjustable Camera Mount (Camera not Included) TPU only

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
Plastic Spider Designs

 Product Description

Adjustable mounting system for the HS1177 Sony Super HAD CCD 600TVL cameras.

  • This mount can be flipped end to end, giving you a mounting height of 20mm or 15mm as well.
  • The mounts can also be flipped for the plates to be facing in instead of out for standoffs that are closer together.
  • Due to the flexibility of the material this mount is made with (TPU), this mount is compatable with all frames that have 5mm standoffs with a gap between 22 and 55mm depending on which way around you turn the mounts. 



**** UPDATE- Additional length was added to the mounting tab by adding an extra hole. This was to allow the camera to sit further back into the frame if desired. This also increases the maximum width the mount allows. Now this will fit up to 55mm of front standoff spacing! 

 Find Similar Products by Category

 Product Reviews

  1. Works Great on the QAV 210

    Posted by Flyfisherfpv on Jul 31st 2018

    Works great on my QAV 210 (using center standoffs) and Foxeer Monster V2. THe holes are a little big, but I just used some m2 washers and everything fits nice and tight now.

  2. Fits the Runcam Split 2 on a ZMR250

    Posted by Unknown on May 27th 2018

    No issues, fits the full-size Runcam Split 2 very well on a ZMR250 frame (5mm round standoffs). I'm still getting Jello but that's from yaw, not much the mount can do about it. It's sturdier than double-sided tape I was using.

  3. Great Product!

    Posted by Tyler Wyman on Mar 8th 2017

    Fits great and looks so much better than the original side plates. The only problem is that some props graze the standoffs now due to the increased thickness. I just trimmed a small notch into the side where the props were hitting and it works perfectly!

  4. nice mount

    Posted by Chris on Jan 27th 2017

    I haven't flown with this mount yet, but so far on the bench it's a nice right fit on my runcam. I'll be getting a few more for the rest of my quads.

  5. Not what I expected, but I could work with it

    Posted by Tadd Eells on May 23rd 2016

    The holes are too big for the screws so they go right through it and do not secure the camera at all. I decided to just hot glue my camera directly to the mount and I haven't had an issue with it moving after a crash. Would have hoped to be able to adjust the camera angle, but I can live with it.

  6. This thing is awesome

    Posted by Andrew on May 3rd 2016

    Fits great, holds camera, literally does what its designed to do.

  7. simple and brilliant!

    Posted by Wicket on Apr 9th 2016

    Ok, I know some frames come with side plates but often times those maybe don't fit right but this is the best HS1177 mount hands down! It's universal so can be used on nearly any frame and the TPU absorbs vibrations and grips the camera nice and tight holding it locked in on your degree of choice!

  8. Works like a charm

    Posted by Jeff on Apr 8th 2016

    This is probably the best mount I've found for any FPV camera, and I've tried a lot. It's simple to install, easy to adjust the camera angle, and holds position quite well. Because it's TPU it even helps isolate the camera from vibration. In crashes the camera angle might be thrown off a little, but the TPU will help save the camera.

  9. Works perfectly

    Posted by dontera on Mar 25th 2016

    The material is flexible but has a lot of friction, so the camera stays in place. Good stuff.

  10. Another great product from Great 3d

    Posted by chad on Mar 17th 2016

    These universal mounts are top quality. Will not break and are very esay to use. buy with confidence.

You Recently Viewed...



Follow us on

Copyright 2020 Plastic-Spider. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the HS1177 Universal Adjustable Camera Mount (Camera not Included) TPU only to your wish list.