Loading... Please wait...

Dust Boot for Probotix CNC Router with Dewalt DNP-611 (Free Download)

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
Plastic Spider Designs
$0.00

 Product Description

Free Downloadable files for Dust Boot for Probotix CNC with Dewalt DNP-611 Router

Included in the download are the following files

  • Dust Boot Plate.DWG
  • Dust Boot Housing.STL
  • Brushes.STL
  • 2.5 inch hose attachment.STL

Parts Needed

  1. The parts made from the files
  2. 7 M3 screws to hold dust boot housing to plate
  3. Double Sided Carpet tape to attach brushes to dust boot housing

Instructions.

  1. Cut Dust Boot Plate from 1.5mm G10 or similar material stiff material.
  2. 3D Print the STL Files from TPU (ThermoPlastic Polyurethane).  You will need to print 3 copies of the Brushes file.
  3. Use double sided Carpet tape and cut strips which should be placed  along the top edge of the brushes.
  4. Stick the brushes to the inside bottom edge of the Dust Boot Housing.  Attach so it gives you the desired length.  I found 3/4" below the bottom of the housing worked well for me.
  5. Attach the Dust Boot Housing to the Dust Boot Plate with 7 M3 screws.  I found the screws held the dust boot to the plate without using nuts but nuts can be added.
  6. Attach the Dust Boot Housing to the CNC Router.  You will need to devise a method to attach the dust boot housing to your CNC.  I used small bungee cords which work well but plan on using magnets.
  7. Attach your dust collection system.
  8. Enjoy dust free routing.

If you do not have a 3D printer available or do not have the ability to print TPU you can purchase the 3d Printed parts at the link below for $40.  The 3D Parts take just under 5 Hours to print.
http://great3d.com/3d-printed-parts-for-probotix-cnc-dust-boot/

License Information: 

Dust Boot for Probotix CNC Router with Dewalt DNP-611 (Free Download) by pLaStIcSpIdEr is licensed under the Creative Commons - Attribution - Non-Commercial license.  This means you can print this for your own use, print it for your friends but please do not print to sell.  If you make any changes to this design and post them for download please attribute the original design to "Robert Wheeler" or "pLaStIc sPiDeR Designs" or both.  

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

newsletter

Follow us on

Copyright 2017 Plastic-Spider. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the Dust Boot for Probotix CNC Router with Dewalt DNP-611 (Free Download) to your wish list.