Loading... Please wait...

Carbon Fiber Infused Gimbal Protector STL File (Free Download)

Hover over image to zoom

  • Image 1
$0.00

 Product Description

This is the STL file download to 3D Print the Carbon Fiber Infused Gimbal Protector.

This does not include the 2 Carbon Fiber plates which can be purchased here  for $5.00 with free shipping.

If you have the ability to cut your own Carbon Fiber plates it requires a quantity of 2 plates with a thickness of .5mm, an outside diameter of 45mm and hole diameter of 17.75mm. 

cf-plate2.jpg

Instructions.

  1. Gimbal Protectors should be printed with flexible TPU Filament.  You can print both Gimbal Protectors at the same time or print them separately.
  2. Slice file to .2 or .25mm layer height.  Infill 50% (for flexibility).  Depending on the brand of filament and your printer you may need to adjust settings.
  3. You will need support just under the center portion.  Make sure you do not insert support in the pocket where the CF plate will go.
  4. Set your printer to pause at 3.5mm.  On a Replicator Type printer running Sailfish Firmware you can do this on the front panel once the print has started.  For other type printers you may need to set the pause using your slicer or some other method.
  5. Coat one side of each of the CF Plates with Elmers Glue Stick and make sure it is dry and completely coated. (This is required so the filament will stick to the CF.  If you do not coat it the TPU will simply ball up and not stick).
  6. Place CF plates into the pocket with the glue coated side facing up.
  7. Unpause the print and let the job finish.
  8. Remove Print from printer
  9. Remove Support.
  10. You can use water to remove any Glue from the CF plate as it is water soluble. 

License Information: 
Carbon Fiber Infused Gimbal Protector STL File (Free Download) by pLaStIcSpIdEr is licensed under the Creative Commons - Attribution - Non-Commercial license.  This means you can edit and print this for your own use, for your friends but please do not print to sell or for profit.  If you make any changes to this design and post them for download please attribute the original design to "Robert Wheeler" or "pLaStIc sPiDeR Designs" or both.  This product is licensed to Great3D.
Designed by pLaStIc sPiDeR

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

newsletter

Follow us on

Copyright 2018 Plastic-Spider. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the Carbon Fiber Infused Gimbal Protector STL File (Free Download) to your wish list.