Loading... Please wait...

Blade Inductrix FPV Camera Mount

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4

 Product Description

This is a Camera/VTX mount for the Blade Inductrix. It fits the ever popular Quanum/HK/Banggood Micro Camera/vtx combo. Weighs in at ~0.85g when printed with TPU, holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

20 degree mount Works well with the 1.8 lense on these cameras.

All stock hardware is used, super simple installation. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. Solder your power wires to the Battery input pads and your ready to fly.


*** If your camera combo comes with a plastic case cover installed, it will need to be removed in order to fit in this mount correctly.


This mount was designed by NorCal3d and a portion of this sell will go to the designer.

 Find Similar Products by Category

 Product Reviews

  1. Awesome Great 3D parts

    Posted by Dingleberry1 on Dec 28th 2016

    I ordered 3 different 3D printed parts & all came out Great!
    I would order from this site again!...

  2. very cool mount

    Posted by steve on Aug 29th 2016

    good little mount, the price is good and the shipping was fast. I had to cut a small portion of the plastic to clear the power wire to the camera. I held the cam in with a rubber band so I could point the camera more level for house flying. Im not good enough to fly full tilt yet.

  3. Great Product and fits perfectly.

    Posted by Jim on Aug 8th 2016

    Fantastic fit for indoor flying with my Inductrix.

You Recently Viewed...



Follow us on

Copyright 2019 Plastic-Spider. All Rights Reserved.
Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the Blade Inductrix FPV Camera Mount to your wish list.